Description
-ESD rubber mat used for microelectronic industries such as electronic semi-conduct devices, electronic computers, electronic communication equipment and integrated circuits etc.
- Eliminate damages caused by static electricity.
-Standard colors: Green, Grey, Blue (Customized colors are available.)
-Standrad sizes: 0.6mx10m, 1x10m, 1.2x10m (Any customzied sizes are available.)
-Thickness: 2mm, 3mm
Parameter of rubber mat/ground mat (thickness: 2mm ) | ||
Static Dissipation layer | Surface resistance | 107-109 Ω |
Friction static voltage | <100V | |
Conductive layer | Surface resistance | <=106Ω |
Friction static voltage | <50V | |
Static decay time | 5000V-500V | <1.9s |
Volume resistance | 107-1010 Ω | |
Specification
Test Item | Test Result | |
Tension Strength | 3.6Mpa | |
Breakage coefficient of elongation | 188% | |
Tear strength(right angle) | 20.6KN/M | |
Resilience (6pcs sheets lapping over) | 14% | |
Temperature of impact embrittlement (not cut) | -25°C No damage | |
Permanent variation under 70°C*22h, 25% compression | 17.9% | |
Aging in hot air(70°C*22h) | Variation of tension strength | +8.0% |
Variation of breakage coefficient of elongation | -3.8% | |
Heat loss | 1.08% | |
Test Standard: GB1040, GB/T529, GB1681, GB5470, GB10654, GB/T7141 | ||
Application
-ESD rubber mat used for microelectronic industries such as electronic semi-conduct devices, electronic computers, electronic communication equipment and integrated circuits etc.
- heat resistant and a perfect choice for use around soldering irons and other heat sources.
Package
10m/roll,
1roll/carton
20cartons/pallet
© Copyright 2021 SHENZHEN MAXSHARER TECHNOLOGY CO.,LTD, All Rights Reserved.粤ICP备11097083
